What is AS/NZS 3500? The plumbing standard explained
The standard behind every compliant plumbing job. Here is what it covers and what it means for you.
AS/NZS 3500 is the joint Australian and New Zealand standard for plumbing and drainage. It sets out how water, hot water, sewer and stormwater systems are designed and installed. The National Construction Code points to it, which is how it ends up binding on licensed plumbers.
You will see the name on plumbing quotes and compliance paperwork. Here is what it covers and what it means for you as an owner.
What does AS/NZS 3500 cover?
It is a series of parts, each handling one area of plumbing. The parts you are most likely to hear about are below.
| Part | What it deals with |
|---|---|
| 3500.0 | Glossary of plumbing and drainage terms |
| 3500.1 | Water services: the cold water supply pipework |
| 3500.2 | Sanitary plumbing and drainage: toilets, basins, waste and sewer lines |
| 3500.3 | Stormwater drainage |
| 3500.4 | Heated water services: hot water systems and their pipework |
Parts get revised over time, so the edition your plumber works to depends on the date and your state. Do not assume an old copy is current.
How does the standard connect to the building code?
The National Construction Code includes the Plumbing Code of Australia. That code references AS/NZS 3500 for much of the detail. Your state or territory regulator then enforces the result through its licensing and inspection rules.
So the standard is not a law you read and follow yourself. It is the technical rulebook behind the licensed plumber's work.
Do you need to read it?
Almost certainly not. The standard is written for plumbers, designers and inspectors. It is dense, and you buy it rather than read it free.
What helps more is knowing the outcome. A job done to the standard ends with a compliance certificate. If a plumber cannot say which rules they worked to, treat that as a warning sign.
Questions to ask your plumber
- Are you licensed in this state? Ask for the licence number and check it with the regulator.
- Will you work to the current plumbing code? That includes the referenced standards.
- Will I get a compliance certificate? It is your record that the job met the rules.
- Does my local water utility add anything? Utilities can set extra requirements.
Is it worth buying a copy yourself?
Usually not. If you are building or renovating, your plumber and certifier already work from it. A copy only helps if you want to check a detail, and even then the regulator is the better first call.
How far can you take this yourself?
You can learn what the parts cover, ask the right questions and keep your paperwork. That is a real advantage when you compare quotes.
This far, and no further. Applying the standard to your pipes is licensed work in most places. Contact your state or territory plumbing regulator to confirm what you may do and what needs a licence. Our guide to what plumbing you can do yourself shows how to check.
Frequently asked questions
What is AS/NZS 3500?
It is the joint Australian and New Zealand standard for plumbing and drainage, split into parts for water, sewer, stormwater and heated water.
Is AS/NZS 3500 law?
Not on its own. The National Construction Code references it, and each state or territory regulator enforces the rules through licensing.
Do homeowners need a copy?
Usually not. Your licensed plumber and certifier work from it. Ask for a compliance certificate instead.
Can I do plumbing to AS/NZS 3500 myself?
Most plumbing work needs a licence. Check with your state or territory regulator before starting.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Standards Australia. Standards Australia
- Australian Building Codes Board. National Construction Code (Plumbing Code of Australia)