What is a vacuum breaker? What it does, and when to call a plumber
A small air inlet protects your drinking water from a hose in a bucket. Here is how it works and who has to do the work.
A vacuum breaker is a backflow device that stops dirty water being sucked back into your drinking water pipes. It lets air in when pressure drops, which breaks the suction. You will find one on garden taps, irrigation lines and some appliances.
Most people meet the term on a hose tap or when a plumber mentions backflow prevention. Here is what the device does and where the licensed work starts.
What does a vacuum breaker do?
Mains pressure normally pushes water out through your taps. If the pressure falls, for example during a main break or heavy fire-fighting demand, water can flow backwards. A hose lying in a bucket, a pool or a garden bed could then draw that water into your pipes.
The vacuum breaker has a small air inlet that opens when pressure drops. Air enters, the suction breaks and the dirty water stays where it is. It is a simple part protecting the water your whole household drinks.
| Where you see it | What it protects against |
|---|---|
| Outdoor hose tap | A hose end sitting in a bucket, pool or garden bed |
| Irrigation system | Soil, fertiliser and stagnant water in the sprinkler lines |
| Laundry or utility connections | Dirty water from a machine or tub being drawn back |
| Commercial and industrial lines | Chemicals and process water |
Do you need one on your hose tap?
Many modern outdoor taps already have a backflow device built in. Check the tap body or ask the person who installed it. If your tap has no marking and an old hose connection, ask a licensed plumber what your area expects.
Requirements differ by state and territory, and by water utility. Do not assume a rule from one state applies in yours.
Vacuum breaker or check valve: which is it?
They are different devices. A check valve is a one-way flap that closes against reverse flow. A vacuum breaker uses an air gap. Some products combine both.
For higher-risk connections, such as irrigation with fertiliser or a pool top-up line, a basic device is often not enough. A more robust backflow prevention device may be required, and some of those need regular testing by a qualified person.
What goes wrong with a vacuum breaker?
- Water spits from the top when the tap is on. That can be normal in some designs, but constant leaking means a worn seal.
- The device is blocked or painted over. The air inlet has to stay clear to work.
- It has been removed because it was in the way. That leaves the supply unprotected.
- It is old and cracked. Sun and age weaken the plastic and seals.
Is it worth replacing a failed one?
Yes. It is a small part guarding a big risk, and doing without it is false economy. A leaking device is a cue to have it checked, not to remove it.
How far can you take this yourself?
You can look at the tap, keep the air inlet clear and keep hose ends out of buckets, pools and drains. That alone lowers the risk.
This far, and no further. Installing, replacing or testing backflow prevention on your plumbing is licensed work in most places. And some devices need periodic testing under local rules. Contact your state or territory plumbing regulator and your water utility to find out what applies at your address. Our guide to what plumbing you can do yourself shows how to check.
Frequently asked questions
What is a vacuum breaker?
It is a backflow prevention device that lets air in when pressure drops, so dirty water cannot be sucked back into the drinking supply.
Where is a vacuum breaker used?
On outdoor hose taps, irrigation lines and some appliance connections. Many modern taps include one.
Can I replace a vacuum breaker myself?
Installing or replacing backflow prevention is licensed work in most places. Check with your state or territory plumbing regulator.
Is a vacuum breaker the same as a check valve?
No. A check valve is a one-way flap, while a vacuum breaker uses an air inlet. Some products combine both.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- NSW Fair Trading. Plumbers, drainers and gasfitters (NSW Fair Trading)
- Australian Building Codes Board. National Construction Code (Plumbing Code of Australia)